SYSTEM PPS-60WT
The PPS-60 WT system is designed to provide a constant control of the main parameters of the
wood drying process. The system has the same features as the
PPS-60 and additionally:
- it is equipped with temperature and humidity pre-set control knobs and provides stable conditions during the wood drying process,
- wood moisture can be monitored in 5 different points
- the receiver is equipped with three LCD displays which constantly deliver the results of the measurements (temperature, air humidity and wood moisture).
The transducers (ZP),are located on the wall outside of the drying chamber and the receiver (ZO) can be located up to 100m from the chambers.
Price: 1193.00 EUR + 23% VAT
| Wood moisture contents | Humidity | Temperature | |
|---|---|---|---|
| Range | 8 % - 60 % abs. moisture cont. | 10 % - 95 % RH | 20°C - 120°C |
| Accuracy | ±2 % (within 8 - 28%) ±2 % + 10 % of measured value (above 28%) |
±3 % (within 40 - 70%) ±4 % (in other parts of range) |
±1 °C |
| Resolution | 0.1 % | 0.1 % | 0.1 °C |
| Electrodes | ϕ 4x30 mm - 3 x 2 pcs. | capacitance sensor HC201 | resistance sensor |
| Wood temp. range | 20 - 100 °C | ||
| Number of wood types | 11 | ||
| Display | LCD 31/2 digits | LCD 31/2 digits | LCD 31/2 digits |
| Output relays load(1) | heating 0.2 A / 240 V drying 0.2 A / 240 V ventilation 0.2 A / 240 V |
||
| Power | 240V, 50Hz (only in the receiver) | ||
| Connection ZP - ZO | 6-wires cable, max. 100m | ||
| Size | 300x400x150 mm | ||
(1) An additional set of relays with the maximum load of 5 A / 220 V can also be installed in this system
